Colours

• B&D Series 2 Light Industrial Roll-A-Doors are available in an extensive range of standard Colorbond® colours including special Zincalume® coated finishes.
• Zincalume® coated finish can be polyurethaned on site for even wider colour selection.

Maintenance 

• No greasing of the door guides is required, and the axle, hubs and all other working components have either been manufactured with self-lubricating materials or greased at the factory.
• To reduce operational and replacement costs, curtains are easily repaired.

Options

• B&D provide tapered curtains to suit floors with a slope across the opening
• Optional electric and remote operation are available.

Mullions for Multiple Doors

• Where a choice of partial or total access to the building is required, a combination of mullions and multiple Roll-A-Door® Series 2 – Light Industrial rolling doors is  recommended, rather than one wide door. Motorisation is not recommended with mullions.

Features include:

• Mullions can be simply disengaged to provide unrestricted full width access
• Mullions for smaller doors lift out by hand
• Individual low effort operation
• Privacy and weather protection of a small opening

Wicket Gates 

• Wicket gates provide quick and easy access in or out of the premises, without the need to raise the door.

Features include:

• Opening size is 1780mm high x 600mm wide.
• This gate is specified when inward opening is required
• Fitted with external key operated night latch lock
• When the door is in the open position the cranked bottom rail hangs 65mm below the lintel

Ventilated Curtains 

• Where ventilation is required the doors may be perforated to allow light penetration or up to 10% airflow. This offeres you all the security you may need plus airflow.

High Wind Areas 

• In any area that could be affected by high wind or extreme weather conditions, B&D recommend the fitting of Windlock Guide Systems.